Product type
Electric holding magnets
Technical data
The maximum holding forces FH are specified for St 37 and refer to the
optimal workpiece density with an air gap δL = 0 mm and 100% occupancy of
the holding surface at 90% of the nominal voltage and at operating
temperature (approx. 70 K excess temperature without additional heat
dissipation). If the application is based on other conditions, the holding
force is reduced.
• Rated voltage: 24 V DC
• Duty cycle: 100% ED
• Insulation class: E
SAV-241-31.pdf
SAV-241-31_EN.pdf