various

Electric holding magnets

SAV 241.32

The electromagnetic holding rods are direct current holding systems. The magnet, which is active when switched on, allows for the holding of ferromagnetic workpieces. Threaded holes are provided on the bottom of the device for mounting. The electrical connection is made via two connection screws located inside the device and are easily accessible. A Pg connector is also provided for attaching a strain-relieved cable. This connector can be screwed in either from the side or from below. When working with electromagnetic holding rods, the relevant accident prevention regulations must be observed depending on the application.

• Rated voltage: 24 V DC
• Insulation class: E
• Protection class: Device IP 53 (according to DIN 40050 connection IP 00
• Duty cycle: 100% ED

with high adhesive forces

SAV-241-32.pdf SAV-241-32_EN.pdf