Grind

for magnetic side suit

Electro-permanent magnet

SAV 243.72

Construction of two powerful bipolar systems for the stop bar, ensuring secure part alignment. The stop magnet operates with a time delay with the base magnet. The stop bars are magnetized in front of the main clamping surface. This securely pulls the workpiece into the lower corner of the stop.
• Pole plate with particularly narrow, continuous longitudinal pole pitch, 3 mm steel and 1 mm brass
• Slats glued and additionally screwed with solid tie rods
• high accuracy due to pole plate screwing in a narrow grid
• Deactivation via demagnetization cycle
• 8 mm wear of the pole plate
• low magnetic field height of 4 mm
• Housing stress-relieved
• Permanent electric system for absolute safety in the event of a power failure
• Spannschlitze an beiden Stirnseiten
• Reinforced systems for heavy-duty applications available on request
• For lengths greater than 1000 mm with through holes for fastening by arrangement
• robust and waterproof
• Protection class IP 65
• suitable for connection to control unit SAV 876.12

Nominal holding force:
• 100 N/cm², adjustable by control unit
Rated voltage, recommended:
• 360 V DC

medium adhesive force

100 N/cm²

thin workpieces, medium size

with ring pole pitch

SAV-243-72.pdf SAV-243-72_EN.pdf

Long min.: 40 mm Long max.: 1200.0 mm
Width min.: 40 mm Width max.: 600.0 mm
Height min.:3.00 mm