Grind

Center Magnetic, for evenness> 0.03 mm

Electro-magnet

SAV 244.43

Poles with particularly closer, continuous polarity, 3 mm steel and 1 mm MS
• Low height
• Lamellae glued and reinforced with tie rods
• High accuracy through pole plate screw connection in the narrow grid
• Low field height with 4 mm
• Elimination via demagnetization cycle
• Fastening drilling image with threaded on the back or through holes by arrangement
• 8 mm wearability of the pole space
• robust and waterproof
• Protection class IP 65
• Suitable for connection to the SAV 876.10 control unit

Nennhaftkraft:

• 100 N/QCM, by control unit by means of a liability force-cod switch

Nominal voltage, recommended:

• 110 in dc

medium detention

100 N/cm²

Thin workpieces of medium size, slices

With a fine parallel science

SAV-244-43.pdf SAV-244-43_EN.pdf

Long min.: 40 mm Long max.: 800.0 mm
Width min.: 40 mm Width max.: 800.0 mm